Cisco : Security Vulnerabilities, CVEs, Published In 2007 CVSS score >= 7

Unspecified vulnerability in the Extensible Authentication Protocol (EAP) implementation in Cisco IOS 12.3 and 12.4 on Cisco Access Points and 1310 Wireless Bridges (Wireless EAP devices), IOS 12.1 and 12.2 on Cisco switches (Wired EAP devices), and CatOS 6.x through 8.x on Cisco switches allows remote attackers to cause a denial of service (device reload) via a crafted EAP Response Identity packet.

Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.2(3) allows remote attackers to cause a denial of service (device reload) via crafted "data in the control-plane path with Layer 7 Application Inspections."

Cisco IP Phone 7940 with firmware P0S3-08-7-00 allows remote attackers to cause a denial of service ("486 Busy" responses or device reboot) via a sequence of SIP INVITE transactions in which the Request-URI lacks a user name, a different vulnerability than CVE-2007-4459.

Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.

Cisco Firewall Services Module (FWSM) 3.2(1), and 3.1(5) and earlier, allows remote attackers to cause a denial of service (device reload) via a crafted HTTPS request, aka CSCsi77844.

Cisco PIX and ASA appliances with 7.1 and 7.2 software, when configured for TLS sessions to the device, allow remote attackers to cause a denial of service (device reload) via a crafted TLS packet, aka CSCsg43276 and CSCsh97120.

Cisco PIX and ASA appliances with 7.0 through 8.0 software, and Cisco Firewall Services Module (FWSM) 3.1(5) and earlier, allow remote attackers to cause a denial of service (device reload) via a crafted MGCP packet, aka CSCsi90468 (appliance) and CSCsi00694 (FWSM).

Integer overflow in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.

Off-by-one error in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors that trigger a heap-based buffer overflow. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.

Unspecified vulnerability in Cisco Unified Intelligent Contact Management Enterprise (ICME), Unified ICM Hosted (ICMH), Unified Contact Center Enterprise (UCCE), Unified Contact Center Hosted (UCCH), and System Unified Contact Center Enterprise (SUCCE) 7.1(5) allows remote authenticated users to gain privileges, and read reports or change the SUCCE configuration, via certain web interfaces, aka CSCsj55686.

Buffer overflow in the Centralized TFTP File Locator Service in Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(3), and Unified CallManager 5.0, allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors involving the processing of filenames, aka CSCsh47712.

Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(2), and Unified CallManager 5.0, allow remote attackers to cause a denial of service (kernel panic) via a flood of SIP INVITE messages to UDP port 5060, which triggers resource exhaustion, aka CSCsi75822.

The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.

Stack-based buffer overflow in the Line Printer Daemon (LPD) in Cisco IOS before 12.2(18)SXF11, 12.4(16a), and 12.4(2)T6 allow remote attackers to execute arbitrary code by setting a long hostname on the target system, then causing an error message to be printed, as demonstrated by a telnet session to the LPD from a source port other than 515.

Cisco Content Switching Modules (CSM) 4.2 before 4.2.7, and Cisco Content Switching Module with SSL (CSM-S) 2.1 before 2.1.6, when service termination is enabled, allow remote attackers to cause a denial of service (reboot) via unspecified vectors related to high network utilization, aka CSCsh57876.

Cisco Content Switching Modules (CSM) 4.2 before 4.2.3a, and Cisco Content Switching Module with SSL (CSM-S) 2.1 before 2.1.2a, allow remote attackers to cause a denial of service (CPU consumption or reboot) via sets of out-of-order TCP packets with unspecified characteristics, aka CSCsd27478.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

The Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier have default passwords for the sypixx and root user accounts, which allows remote attackers to perform administrative actions, aka CSCsj34681.

Multiple SQL injection vulnerabilities in Cisco CallManager and Unified Communications Manager (CUCM) before 3.3(5)sr2b, 4.1 before 4.1(3)sr5, 4.2 before 4.2(3)sr2, and 4.3 before 4.3(1)sr1 allow remote attackers to execute arbitrary SQL commands via the lang variable to the (1) user or (2) admin logon page, aka CSCsi64265.

Cisco IP Phone 7940 and 7960 with P0S3-08-6-00 firmware, and other SIP firmware before 8.7(0), allows remote attackers to cause a denial of service (device reboot) via (1) a certain sequence of 10 invalid SIP INVITE and OPTIONS messages; or (2) a certain invalid SIP INVITE message that contains a remote tag, followed by a certain set of two related SIP OPTIONS messages.

Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device crash) via (1) "abnormal" MGCP messages, aka CSCsd81407; and (2) a large facsimile packet, aka CSCej20505.

Multiple memory leaks in Cisco IOS 12.0 through 12.4 allow remote attackers to cause a denial of service (device crash) via a malformed SIP packet, aka (1) CSCsf11855, (2) CSCeb21064, (3) CSCse40276, (4) CSCse68355, (5) CSCsf30058, (6) CSCsb24007, and (7) CSCsc60249.

Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service via (1) a malformed MGCP packet, which causes a device hang, aka CSCsf08998; a malformed H.323 packet, which causes a device crash, as identified by (2) CSCsi60004 with Proxy Unregistration and (3) CSCsg70474; and a malformed Real-time Transport Protocol (RTP) packet, which causes a device crash, as identified by (4) CSCse68138, related to VOIP RTP Lib, and (5) CSCse05642, related to I/O memory corruption.

Buffer overflow in the Next Hop Resolution Protocol (NHRP) functionality in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (restart) and execute arbitrary code via a crafted NHRP packet.

Unspecified vulnerability in Cisco IOS and Cisco IOS XR 12.x up to 12.3, including some versions before 12.3(15) and 12.3(14)T, allows remote attackers to obtain sensitive information (partial packet contents) or cause a denial of service (router or component crash) via crafted IPv6 packets with a Type 0 routing header.